A Model of Basic Surgical Skills Course to Supplement the Training of Foundation-Year Doctors by Efficient Use of Local Resources

INTRODUCTION: This study investigates the efficiency of teaching basic surgical skills to foundation-year doctors and medical students by using local resources. METHODS: A course comprising 4 workshops, once a week, of 3 hours duration per session was delivered using local education center facilities and using the local faculty of consultants and surgical trainees. Teaching methods include practical skill stations supplemented with short didactic lectures and group discussion. Precourse and postcourse assessments were completed by candidates and analyzed to measure outcomes of the course both subjectively and objectively. RESULTS: A total number of 20 participants completed the course. On completion of the course, (1) participants' theoretical knowledge improved significantly (p < 0.0001), as measured by multiple-choice questions, and scores improved by 35% (mean 44%, standard deviation = 16%) before the course compared to (mean = 79%, standard deviation = 13) after the course; (2) the level of confidence in knowledge and skills was measured by a questionnaire on a scale of 1 to 5, and there was a significant (p < 0.0001) improvement on postcourse assessment (mean difference = 1.5, 95% CI: 0.7-2.4); and (3) practical skills such as suture position, knot tying, and wound apposition significantly improved after the course, χ(2) (2) = 16, p < 0.001; χ(2) (2) = 18, p < 0.001; and χ(2) (2) = 22, p < 0.0001, respectively. CONCLUSION: Effective delivery of basic surgical skills to foundation-year doctors by using local resources can be achieved at low cost

Misoprostol for Termination of Second Trimester Pregnancy

Introductions: The termination of second trimester pregnancy is challenging due unfavorable cervix. This study evaluate the efficacy and maternal side effects of intravaginal misoprostol for termination of second trimester pregnancy.Methods: During one year period from 15th June 2011 to 14th June 2012,Department of Obstetrics and Gynaecology of Patan Hospital, women admitted for second trimester termination of pregnancy for fetal congenital anomalies and intrauterine fetal demise were studied using the International Federation of Gynaecology and Obstetrics recommended doses of vaginal misoprostol. For congenital anomalies, 400 mcg 3 hourly to a maximum of 5 doses were used. For fetal demise, gestational age of 13-17 weeks received 200 mcg every 6 hourly to a maximum of 4 doses, and 18-26 weeks dose was adjusted to 100 mcg. Main outcome measures included success rate of abortion within 48 hours, induction to delivery interval and maternal side effects.Results: There were 40 patients during study period. Success rate for termination of 2nd trimester pregnancy within 48 hours was 88.8% for congenital anomalies. For fetal demise, success of termination was 90.9% at 13-17 weeks and 100% at 18-26 weeks. Median time from induction to delivery was 26.8 hours for congenital anomalies. For fetal demise, it was 18 hours for 13-17 weeks was and 24 hours at 18 to 26 weeks respectively. Abdominal pain was seen in all doses of misoprostol.Conclusions: Vaginal misoprostol is an effective method for termination ofsecond trimester pregnancy.Keywords: misoprostol, pregnancy, second trimester terminatio

Opportunistic Data Collection and Routing in Segmented Wireless Sensor Networks

International audienceIn this paper we address routing in the context of segmented wireless sensor networks in which a mobile entity, known as MULE, may collect data from the different subnetworks and forward it to a sink for processing. The chosen settings are inspired by the potential application of wireless sensor networks for airport surface monitoring. In such an environment, the subnetworks could take advantage of airport service vehicles, buses or even taxiing aircraft to transfer information to the sink (e.g., control tower), without interfering with the regular functioning of the airport. Generally, this kind of communication problem is addressed in the literature considering a single subsink in each subnetwork. We consider in this paper the multiple subsinks case and propose two strategies to decide when and where (to which subsink) sensor nodes should transmit their sensing data. Through a dedicated simulation model we have developed, we assess and compare the performance of both strategies in terms of packet delivery ratio, power consumption and workload balance among subsinks. This paper is an intermediate step in the research of this problem, which evidences the benefit of storing the information on the subsinks and distributing it among them before the arrival of the MULE. Based on results, we provide some information on further works

GNAO1 encephalopathy: broadening the phenotype and evaluating treatment and outcome

OBJECTIVE: To describe better the motor phenotype, molecular genetic features, and clinical course of GNAO1-related disease. METHODS: We reviewed clinical information, video recordings, and neuroimaging of a newly identified cohort of 7 patients with de novo missense and splice site GNAO1 mutations, detected by next-generation sequencing techniques. RESULTS: Patients first presented in early childhood (median age of presentation 10 months, range 0-48 months), with a wide range of clinical symptoms ranging from severe motor and cognitive impairment with marked choreoathetosis, self-injurious behavior, and epileptic encephalopathy to a milder phenotype, featuring moderate developmental delay associated with complex stereotypies, mainly facial dyskinesia and mild epilepsy. Hyperkinetic movements were often exacerbated by specific triggers, such as voluntary movement, intercurrent illnesses, emotion, and high ambient temperature, leading to hospital admissions. Most patients were resistant to drug intervention, although tetrabenazine was effective in partially controlling dyskinesia for 2/7 patients. Emergency deep brain stimulation (DBS) was life saving in 1 patient, resulting in immediate clinical benefit with complete cessation of violent hyperkinetic movements. Five patients had well-controlled epilepsy and 1 had drug-resistant seizures. Structural brain abnormalities, including mild cerebral atrophy and corpus callosum dysgenesis, were evident in 5 patients. One patient had a diffuse astrocytoma (WHO grade II), surgically removed at age 16. CONCLUSIONS: Our findings support the causative role of GNAO1 mutations in an expanded spectrum of early-onset epilepsy and movement disorders, frequently exacerbated by specific triggers and at times associated with self-injurious behavior. Tetrabenazine and DBS were the most useful treatments for dyskinesia

Relaparatomy after caesarean section

Introductions: Relaparotomy after caesarean section is rare and literature are scanty. The decision requires a good clinical judgment to save mother’s life. Our objective was to analyse the outcome of relaparotomy after caesarean section at Patan hospital.Methods: This was a cross sectional study done at the department of obstetrics and gynaecology, Patan Hospital, Nepal. Charts of caesarean section from January 2010 to December 2014 were reviewed to analyze the cases of relaparotomy for incidence, indication, management and outcome. Descriptive analysis was done using SPSS.Results: During 5 years, there were 17,538 caesarean deliveries, 39.15% of total 44,788 deliveries. Relaparotomy was done in 15 cases, 0.085% of 17538 caesarean. Mean age was 26.6±4.7 years, 14 (93.3%) were between 25-35 years, 12 (80%) were primigravida. Indications of relaparotomy were pyoperitonium (40%), hemoperitoneum (33.3%) and rectus sheath hematoma (26.7%). Out of 15 relaparotomy, 14 were conservative surgery and one required hysterectomy. There was no maternal mortality. Conclusions: Relaparotomyin our study the rate was eight in 10,000. Those requiring relaparatomy had fetal distress as indication for first caesarean.Keywords: caesarean section, pyoperitoneum, relaparotom

In situ characterisation of surface roughness and its amplification during multilayer single-track laser powder bed fusion additive manufacturing

Surface roughness controls the mechanical performance and durability (e.g., wear and corrosion resistance) of laser powder bed fusion (LPBF) components. The evolution mechanisms of surface roughness during LPBF are not well understood due to a lack of in situ characterisation methods. Here, we quantified key processes and defect dynamics using synchrotron X-ray imaging and ex situ optical imaging and explained the evolution mechanisms of side-skin and top-skin roughness during multi-layer LPBF of Ti-6Al-4V (where down-skin roughness was out of the project scope). We found that the average surface roughness alone is not an accurate representation of surface topology of an LPBF component and that the surface topology is multimodal (e.g., containing both roughness and waviness) and multiscale (e.g., from 25 µm sintered powder features to 250 µm molten pool wavelength). Both roughness and topology are significantly affected by the formation of pre-layer humping, spatter, and rippling defects. We developed a surface topology matrix that accurately describes surface features by combining 8 different metrics: average roughness, root mean square roughness, maximum profile peak height, maximum profile valley height, mean height, mean width, skewness, and melt pool size ratio. This matrix provides a guide to determine the appropriate linear energy density to achieve the optimum surface finish of Ti-6Al-4V thin-wall builds. This work lays a foundation for surface texture control which is critical for build design, metrology, and performance in LPBF

Coordination of Mobile Mules via Facility Location Strategies

In this paper, we study the problem of wireless sensor network (WSN) maintenance using mobile entities called mules. The mules are deployed in the area of the WSN in such a way that would minimize the time it takes them to reach a failed sensor and fix it. The mules must constantly optimize their collective deployment to account for occupied mules. The objective is to define the optimal deployment and task allocation strategy for the mules, so that the sensors' downtime and the mules' traveling distance are minimized. Our solutions are inspired by research in the field of computational geometry and the design of our algorithms is based on state of the art approximation algorithms for the classical problem of facility location. Our empirical results demonstrate how cooperation enhances the team's performance, and indicate that a combination of k-Median based deployment with closest-available task allocation provides the best results in terms of minimizing the sensors' downtime but is inefficient in terms of the mules' travel distance. A k-Centroid based deployment produces good results in both criteria.Comment: 12 pages, 6 figures, conferenc

Sinter formation during directed energy deposition of titanium alloy powders

During directed energy deposition (DED) additive manufacturing, powder agglomeration and sintering can occur outside of the melt pool when using titanium alloy powders. Using in situ synchrotron radiography we investigate the mechanisms by which sintering of Ti6242 powder occurs around the pool, performing a parametric study to determine the influence of laser power and stage traverse speed on sinter build-up. The results reveal that detrimental sinter can be reduced using a high laser power or increased stage traverse speed, although the latter also reduces deposition layer thickness. The mechanism of sinter formation during DED was determined to be in-flight heating of the powder particles in the laser beam. Calculations of particle heating under the processing conditions explored in this study confirm that powder particles can reasonably exceed 700 °C, the threshold for Ti surface oxide dissolution, and thus the powder is prone to sintering if not incorporated into the melt pool. The build-up of sinter powder layer on deposit surfaces led to lack of fusion pores. To mitigate sinter formation and its detrimental effects on DED component quality, it is essential that the powder delivery spot area is smaller than the melt pool, ensuring most powder lands in the melt pool

A functional polymorphism in the 5HTR2C gene associated with stress responses also predicts incident cardiovascular events.

Previously we have shown that a functional nonsynonymous single nucleotide polymorphism (rs6318) of the 5HTR2C gene located on the X-chromosome is associated with hypothalamic-pituitary-adrenal axis response to a stress recall task, and with endophenotypes associated with cardiovascular disease (CVD). These findings suggest that individuals carrying the rs6318 Ser23 C allele will be at higher risk for CVD compared to Cys23 G allele carriers. The present study examined allelic variation in rs6318 as a predictor of coronary artery disease (CAD) severity and a composite endpoint of all-cause mortality or myocardial infarction (MI) among Caucasian participants consecutively recruited through the cardiac catheterization laboratory at Duke University Hospital (Durham, NC) as part of the CATHGEN biorepository. Study population consisted of 6,126 Caucasian participants (4,036 [65.9%] males and 2,090 [34.1%] females). A total of 1,769 events occurred (1,544 deaths and 225 MIs; median follow-up time = 5.3 years, interquartile range = 3.3-8.2). Unadjusted Cox time-to-event regression models showed, compared to Cys23 G carriers, males hemizygous for Ser23 C and females homozygous for Ser23C were at increased risk for the composite endpoint of all-cause death or MI: Hazard Ratio (HR) = 1.47, 95% confidence interval (CI) = 1.17, 1.84, p = .0008. Adjusting for age, rs6318 genotype was not related to body mass index, diabetes, hypertension, dyslipidemia, smoking history, number of diseased coronary arteries, or left ventricular ejection fraction in either males or females. After adjustment for these covariates the estimate for the two Ser23 C groups was modestly attenuated, but remained statistically significant: HR = 1.38, 95% CI = 1.10, 1.73, p = .005. These findings suggest that this functional polymorphism of the 5HTR2C gene is associated with increased risk for CVD mortality and morbidity, but this association is apparently not explained by the association of rs6318 with traditional risk factors or conventional markers of atherosclerotic disease